-40%
Reed Mfg 04477 PLAS2PE PLAS In-Line Rotary™ Pipe Cutter, 14

Reed Mfg 04477 PLAS2PE PLAS In-Line Rotary™ Pipe Cutter, 14"-18" PE, HDPE

$ 767.03

Availability: 82 in stock
  • Minimum Pipe Size: 14 in
  • All returns accepted: Returns Accepted
  • Custom Bundle: No
  • California Prop 65 Warning: WARNING - https://www.p65warnings.ca.gov/
  • Brand: Reed Mfg
  • MPN: 04477
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Modified Item: No
  • Restocking Fee: 15%
  • Return shipping will be paid by: Buyer
  • Model: PLAS2PE
  • Item must be returned within: 30 Days
  • Cutter Type: Constant Swing Tubing Cutter
  • Condition: New
  • Maximum Pipe Size: 18 in

    Description

    Reed Mfg PLAS2PE PLAS In-Line Rotary™ Pipe Cutter, 14"-18" PE, HDPE
    PLAS In-Line Rotary™ Cutters are excellent for cutting PVC or PE pipe in trench or above ground. Each PLAS rotary cutter needs just 6” to 8” (153 - 203 mm) clearance around the pipe, making them easy to operate in trench and with lower prep costs. Outboard rollers keep the cutter aligned on pipe, ensuring a square cut every time. Each PLAS cutter also can produce, in-line with the cut, a 15° bevel on both sides of the pipe using bevel blade PLAS4B*. For cutting PE pipe**, REED developed a hardened, tool steel blade for best cutting results. The engineered blade tip drives chips out of the way while cutting PE. PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternate PLAS In-Line Rotary Pipe Cutter Blades.
    *Bevel blade PLAS4B included with PVC models 04470, 04475, 04480 and 04485; can also be added to PE models. Contact REED for details.
    **
    PLAS Cutter Specific Limitations for PE:
    up to 14" pipe (355 mm) - 2" (51 mm) wall thickness
    up to 18" pipe (500 mm) - 1 1/2" (38 mm) wall thickness
    up to 28" pipe (800 mm) - 1" (25.4 mm) wall thickness
    Safe to use as it creates no dust and chips fall where they are cut; chips are not blown far into pipe.
    Only 6"-8" clearance needed to turn cutter around pipe.
    Cuts out-of-round pipe because of spring loaded nuts.
    If the job requires a bevel on PE, add REED bevel blade PLAS4B to simultaneously cut and bevel.
    This is an inexpensive tool for contractors to use to make a cut for a tie-in or pipe break and then get the line back in use.
    Pipe Capacity:  14-18"
    Application:
    PE, HDPE
    Weight:  57 lb